Difference between revisions of "Boss LS-3655"
From Annapolis Makerspace Wiki
(→Laser Parameters) |
|||
| Line 8: | Line 8: | ||
== Laser Parameters == | == Laser Parameters == | ||
If you want to set up the Boss LS-3655 in LightBurn or another program, here are the settings you need: | If you want to set up the Boss LS-3655 in LightBurn or another program, here are the settings you need: | ||
| + | * Type: Ruida | ||
| + | * Connection: USB or ethernet, depending on if you're connected directly via USB (the shop laptop) or ethernet (your laptop or another computer on the shop LAN) | ||
* 1400mm x 900mm | * 1400mm x 900mm | ||
* Home is rear-right position | * Home is rear-right position | ||
* 100W (don't think this is a configuration option, just good to know for selecting power settings per Recommended Settings) | * 100W (don't think this is a configuration option, just good to know for selecting power settings per Recommended Settings) | ||
Revision as of 21:23, 5 August 2019
Useful Links
- ATX Hackerspace Materials List - Until we have our own list, refer to this list for what's safe/not safe to use on the laser
- Boss Laser Manuals Downloads - LS Machine Operations. LS QuickStart Guide, LaserWORKS, Rotary
- Boss Laser Materials Recommended Settings - Use settings for 100W
- LightBurn Software Manual - Documentation for the LightBurn software
- LightBurn Tutorials
Laser Parameters
If you want to set up the Boss LS-3655 in LightBurn or another program, here are the settings you need:
- Type: Ruida
- Connection: USB or ethernet, depending on if you're connected directly via USB (the shop laptop) or ethernet (your laptop or another computer on the shop LAN)
- 1400mm x 900mm
- Home is rear-right position
- 100W (don't think this is a configuration option, just good to know for selecting power settings per Recommended Settings)
