Difference between revisions of "Boss LS-3655"
From Annapolis Makerspace Wiki
(→Materials Links) |
(→Acrylic) |
||
| (37 intermediate revisions by 3 users not shown) | |||
| Line 3: | Line 3: | ||
* [https://lightburnsoftware.com/pages/lightburn-documentation LightBurn Software Manual] - Documentation for the LightBurn software | * [https://lightburnsoftware.com/pages/lightburn-documentation LightBurn Software Manual] - Documentation for the LightBurn software | ||
* [https://lightburnsoftware.com/pages/tutorials LightBurn Tutorials] | * [https://lightburnsoftware.com/pages/tutorials LightBurn Tutorials] | ||
| + | * [https://forum.lightburnsoftware.com/t/rotary-issue-y-axis/1827 Preventing Homing on Laser] - Press ESC to cancel the homing sequence, after the controller beeps (carriage may start moving a split second before that) | ||
== Recommended Settings == | == Recommended Settings == | ||
| − | * [[Media:Boss_LS-3655_100W_Lightburn_Cut_Library.clb|Boss LS-3655 100W Lightburn Cut Library, updated 11/15/2019]] - Lightburn Library with Boss Recommended Settings and more | + | * [[Media:Boss_LS-3655_100W_Lightburn_Cut_Library.clb|Boss LS-3655 100W Lightburn Cut Library, updated 11/15/2019]] - Lightburn Library with Boss Recommended Settings and more NOTE: If the downloaded file is a .xml, rename it to be .clb extension |
* [https://www.bosslaser.com/laser-settings/ Boss Laser Materials Recommended Settings] - Use settings for 100W | * [https://www.bosslaser.com/laser-settings/ Boss Laser Materials Recommended Settings] - Use settings for 100W | ||
* [https://nova-labs.org/wiki/_media/equipment/hurricane-charley-material-settings.pdf NoVA Labs Recommended Settings For Their 100W Laser] | * [https://nova-labs.org/wiki/_media/equipment/hurricane-charley-material-settings.pdf NoVA Labs Recommended Settings For Their 100W Laser] | ||
| Line 17: | Line 18: | ||
* [https://www.epiloglaser.com/resources/sample-club/slate-coasters-laser-engraving.htm Laser Cutting Slate Coasters] | * [https://www.epiloglaser.com/resources/sample-club/slate-coasters-laser-engraving.htm Laser Cutting Slate Coasters] | ||
* [https://www.bosslaser.com/laser-engraving-stone Laser Engraving Stone] - Great list of various stones that Boss recommends for engraving, as well as tips | * [https://www.bosslaser.com/laser-engraving-stone Laser Engraving Stone] - Great list of various stones that Boss recommends for engraving, as well as tips | ||
| + | |||
| + | == Safety == | ||
| + | * [http://www.makeitlabs.com/blog/test-early-test-often-laser-materials-safety-intro MakeItLabs Laser Materials Safety Intro] | ||
== Laser Parameters == | == Laser Parameters == | ||
If you want to set up the Boss LS-3655 in LightBurn or another program, here are the settings you need: | If you want to set up the Boss LS-3655 in LightBurn or another program, here are the settings you need: | ||
* Type: Ruida | * Type: Ruida | ||
| − | * Connection: | + | * Connection: USB (Best to use this setting but transfer the file to computer already connect to Boss, rather than moving USB) |
* 1400mm x 900mm | * 1400mm x 900mm | ||
* Home is rear-right position | * Home is rear-right position | ||
| Line 27: | Line 31: | ||
== Software == | == Software == | ||
| − | + | * [https://lightburnsoftware.com Lightburn] - Makerspace members receive a significant discount on a license for their own computer, where they can prepare Lightburn files at their convenience. These files can later be uploaded to the laser's computer at the makerspace. Inquire on our Slack channel for more details. | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
== Example Projects == | == Example Projects == | ||
| Line 47: | Line 43: | ||
== Design Sites == | == Design Sites == | ||
| + | === Pay Sites === | ||
* [https://laser-templates.com Laser Templates] - Inexpensive designs fully usable for both personal and commercial products | * [https://laser-templates.com Laser Templates] - Inexpensive designs fully usable for both personal and commercial products | ||
| + | * [https://www.etsy.com/shop/Vasily39 Laser Cutting Templates by Vasily39 on Etsy] | ||
| + | === Free Sites === | ||
* [https://www.dxfforcnc.com/collections/free-dxf-files DXFforCNC] | * [https://www.dxfforcnc.com/collections/free-dxf-files DXFforCNC] | ||
* [http://www.readytocut.com/community/forums/cnc-art-file-sharing.136/ Ready To Cut] - CNC Art Files For Sharing | * [http://www.readytocut.com/community/forums/cnc-art-file-sharing.136/ Ready To Cut] - CNC Art Files For Sharing | ||
| Line 56: | Line 55: | ||
* [https://www.scan2cad.com/free-downloads/dxf/ Scan2CAD Free DXF Files] | * [https://www.scan2cad.com/free-downloads/dxf/ Scan2CAD Free DXF Files] | ||
* [https://www.designshop.com/search/free-cnc-project-files.html DesignShop Free CNC Project Files] | * [https://www.designshop.com/search/free-cnc-project-files.html DesignShop Free CNC Project Files] | ||
| + | * [http://wood-toolbox.com/ Wood Toolbox] - Templates for lasers and CNCs | ||
| + | * [https://www.makecnc.com/welcome.php MakeCNC] | ||
| + | |||
| + | == Design Tools == | ||
| + | * [http://stencilfy.herokuapp.com/ Stencilfy] - Turn text into stencils | ||
| + | * [https://suncatcherstudio.com/ Stencil Generator from Suncatcher Studio] | ||
| + | * [http://flatfab.com/ FlatFab] | ||
| + | * [https://www.luban3d.com/ LubAn 3D] - Tons of different tools for creating or processing 3D models for 3D printing, CNC and laser cutting | ||
| + | * [https://polygonia.design/ Polygonia Design Suite] - Rapidly Create Symmetrical Designs for Manufacturing | ||
| + | * [http://www.photo2stencil.com/ Photo 2 Stencil] | ||
| + | * [[Boss LS-3655#Box_Generators|Box Generators]] | ||
== Useful Tools == | == Useful Tools == | ||
| Line 61: | Line 71: | ||
== Materials Links == | == Materials Links == | ||
| − | * [https:// | + | === Wood === |
| + | * [https://ocoochhardwoods.com Ocooch Hardwoods] - Suppliers of thin wood and plywood for scroll sawing, carving, intarsia, wood turning, laser cutting and engraving, thick veneers and much more. | ||
| + | * [https://www.woodcraft.com/ WoodCraft] | ||
| + | |||
| + | === Acrylic === | ||
* [https://www.usplastic.com/catalog/default.aspx?catid=442&parentcatid=443 USPlastics Acrylic] | * [https://www.usplastic.com/catalog/default.aspx?catid=442&parentcatid=443 USPlastics Acrylic] | ||
* [https://www.engraving-supplies.com/ TroTec Engraving Supplies] - Including two-color acrylics like Rowmark | * [https://www.engraving-supplies.com/ TroTec Engraving Supplies] - Including two-color acrylics like Rowmark | ||
| − | * [https:// | + | * [https://www.ebay.com/str/plasticsacrylic plasticsacrylic on eBay] - (NOTE: Sometimes hefty shipping fees but can combine orders) Has some thinner (1/16") acrylic not found in other sources, also has a wide selection of other interesting acrylics including various colors of mirrored |
| + | * [https://www.engraversjournal.com/article.php/3179/index.html The Scoop On Plastic Substrates] | ||
| + | * [https://www.cohnacrylics.com/ COHn Acrylics] | ||
| + | |||
| + | === Various === | ||
| + | * [https://www.xtool.com/pages/xtool-selected-materials XTool] - Acrylic, fancy plywood | ||
* [https://www.inventables.com/categories/materials Inventables] - Acrylic, circuit board blanks, corian, machinable wax and foam, metal, plastic, stamping, wood & mdf | * [https://www.inventables.com/categories/materials Inventables] - Acrylic, circuit board blanks, corian, machinable wax and foam, metal, plastic, stamping, wood & mdf | ||
| + | * [https://www.rowmark.com/products RowMark] - Lots of different specialty materials including wood and acrylic for lasers | ||
| + | * [https://smokeyhilldesigns.com/ Smoke Hill Designs] - Wood and acrylic for lasers | ||
| + | * [https://modfy.build/ Modfy] - Wood and acrylic for lasers, lots of different patterns and colors | ||
| + | |||
| + | === Other === | ||
| + | * [https://browse.jdsindustries.com/main.php?r=frontEnd&view=front&jds-category1=16&jds-category1-desc=Laserable+Leatherette JDS Industries] - Laserable Leatherette | ||
| + | |||
| + | === Engraving/Finishing === | ||
* [https://www.jpplus.com/stone-color-fill-kit-5-colors Stone Color Fill] - Soaks into pores of stone that's been laser engraved | * [https://www.jpplus.com/stone-color-fill-kit-5-colors Stone Color Fill] - Soaks into pores of stone that's been laser engraved | ||
* [https://www.jpplus.com/6-x-25-engravable-laser-foil Laser Foil] | * [https://www.jpplus.com/6-x-25-engravable-laser-foil Laser Foil] | ||
| + | * [https://www.jpplus.com/engraving/fabrication/marking/laserflex-heat-transfer-sample-kit Laser heat transfer foil sheet] | ||
| + | * [https://www.cermark.com/ CerMark Spray] - For marking typically un-markable metal with the laser. Binds the spray material to the metal | ||
| + | * [https://smile.amazon.com/CRC-03084-Lubricant-Aerosol-Spray/dp/B0013J62P4 CRC Dry Moly Lube] - Cheap alternative to CerMark Spray | ||
| + | * [https://www.jpplus.com/cermark-metal-marking-tape CerMark Tape] - An alternative for when spraying isn't an option | ||
| + | * [https://www.jpplus.com/engraving/fabrication/marking/laserflex-heat-transfer-sample-kit LaserFlex Heat Transfer Sample Kit] - An alternative to the CerMark Tape | ||
| + | * [https://www.laserbondingtech.com/order LaserBond] - Another alternative to CerMark Spray | ||
| + | * [https://brilliancelaserinks.com/ Brilliance Laser Inks] - Alternative to CerMark Spray but also has a powder option | ||
== Box Generators == | == Box Generators == | ||
| Line 73: | Line 107: | ||
https://boxmaker.connectionlab.org/ | https://boxmaker.connectionlab.org/ | ||
| + | |||
https://boxdesigner.connectionlab.org | https://boxdesigner.connectionlab.org | ||
| + | |||
http://boxdesigner.frag-den-spatz.de/ | http://boxdesigner.frag-den-spatz.de/ | ||
| Line 81: | Line 117: | ||
https://github.com/Neon22/inkscape-LasercutBox | https://github.com/Neon22/inkscape-LasercutBox | ||
| + | |||
https://github.com/BvdP/elliptical-box-maker/ | https://github.com/BvdP/elliptical-box-maker/ | ||
| + | |||
https://github.com/paulh-rnd/TabbedBoxMaker | https://github.com/paulh-rnd/TabbedBoxMaker | ||
https://imagio.dk/boxmaker/ | https://imagio.dk/boxmaker/ | ||
| + | |||
https://www.instructables.com/id/Generating-elliptical-boxes-using-a-laser-cutter-a/ | https://www.instructables.com/id/Generating-elliptical-boxes-using-a-laser-cutter-a/ | ||
| + | |||
https://www.instructables.com/id/Joinery-Joints-for-Laser-Cut-Assemblies/ | https://www.instructables.com/id/Joinery-Joints-for-Laser-Cut-Assemblies/ | ||
http://joostn.github.io/OpenJsCad/ - Gear generator | http://joostn.github.io/OpenJsCad/ - Gear generator | ||
| + | |||
http://jeromeleary.com/laser/ | http://jeromeleary.com/laser/ | ||
| Line 96: | Line 137: | ||
https://www.thingiverse.com/thing:255013 | https://www.thingiverse.com/thing:255013 | ||
| + | |||
https://www.thingiverse.com/thing:404 | https://www.thingiverse.com/thing:404 | ||
Latest revision as of 14:30, 23 February 2024
Contents
Useful Links
- Boss Laser Manuals Downloads - LS Machine Operations. LS QuickStart Guide, LaserWORKS, Rotary
- LightBurn Software Manual - Documentation for the LightBurn software
- LightBurn Tutorials
- Preventing Homing on Laser - Press ESC to cancel the homing sequence, after the controller beeps (carriage may start moving a split second before that)
Recommended Settings
- Boss LS-3655 100W Lightburn Cut Library, updated 11/15/2019 - Lightburn Library with Boss Recommended Settings and more NOTE: If the downloaded file is a .xml, rename it to be .clb extension
- Boss Laser Materials Recommended Settings - Use settings for 100W
- NoVA Labs Recommended Settings For Their 100W Laser
Material Guides
- ATX Hackerspace Materials List - Until we have our own list, refer to this list for what's safe/not safe to use on the laser
- Epilog Materials Compatibility List
- Universal Laser Materials Library
- FullSpectrum Laser Wood List - List of woods that FSLaser recommends/doesn't recommend
- AP Lazer - How To Choose The Best Wood For Laser Engraving
- Laser Cutting Slate Coasters
- Laser Engraving Stone - Great list of various stones that Boss recommends for engraving, as well as tips
Safety
Laser Parameters
If you want to set up the Boss LS-3655 in LightBurn or another program, here are the settings you need:
- Type: Ruida
- Connection: USB (Best to use this setting but transfer the file to computer already connect to Boss, rather than moving USB)
- 1400mm x 900mm
- Home is rear-right position
- 100W (don't think this is a configuration option, just good to know for selecting power settings per Recommended Settings)
Software
- Lightburn - Makerspace members receive a significant discount on a license for their own computer, where they can prepare Lightburn files at their convenience. These files can later be uploaded to the laser's computer at the makerspace. Inquire on our Slack channel for more details.
Example Projects
- Boss Laser Ideas Boss Laser Project Downloads
- Universal Laser Examples
- Epilog's Sample Club Projects
- Designs By Phil Glowforge Projects
- Thingiverse - BrianHanifin Glowforge Projects
- Latest Made Glowforge Project Ideas
- Inventables Project Ideas
Design Sites
Pay Sites
- Laser Templates - Inexpensive designs fully usable for both personal and commercial products
- Laser Cutting Templates by Vasily39 on Etsy
Free Sites
- DXFforCNC
- Ready To Cut - CNC Art Files For Sharing
- CNC File Sharing
- 3axis.co - Free vector files for laser cutting
- CNC Cookbook Free DXF Files
- FileCNC Free Vector Files for CNC
- Scan2CAD Free DXF Files
- DesignShop Free CNC Project Files
- Wood Toolbox - Templates for lasers and CNCs
- MakeCNC
Design Tools
- Stencilfy - Turn text into stencils
- Stencil Generator from Suncatcher Studio
- FlatFab
- LubAn 3D - Tons of different tools for creating or processing 3D models for 3D printing, CNC and laser cutting
- Polygonia Design Suite - Rapidly Create Symmetrical Designs for Manufacturing
- Photo 2 Stencil
- Box Generators
Useful Tools
Materials Links
Wood
- Ocooch Hardwoods - Suppliers of thin wood and plywood for scroll sawing, carving, intarsia, wood turning, laser cutting and engraving, thick veneers and much more.
- WoodCraft
Acrylic
- USPlastics Acrylic
- TroTec Engraving Supplies - Including two-color acrylics like Rowmark
- plasticsacrylic on eBay - (NOTE: Sometimes hefty shipping fees but can combine orders) Has some thinner (1/16") acrylic not found in other sources, also has a wide selection of other interesting acrylics including various colors of mirrored
- The Scoop On Plastic Substrates
- COHn Acrylics
Various
- XTool - Acrylic, fancy plywood
- Inventables - Acrylic, circuit board blanks, corian, machinable wax and foam, metal, plastic, stamping, wood & mdf
- RowMark - Lots of different specialty materials including wood and acrylic for lasers
- Smoke Hill Designs - Wood and acrylic for lasers
- Modfy - Wood and acrylic for lasers, lots of different patterns and colors
Other
- JDS Industries - Laserable Leatherette
Engraving/Finishing
- Stone Color Fill - Soaks into pores of stone that's been laser engraved
- Laser Foil
- Laser heat transfer foil sheet
- CerMark Spray - For marking typically un-markable metal with the laser. Binds the spray material to the metal
- CRC Dry Moly Lube - Cheap alternative to CerMark Spray
- CerMark Tape - An alternative for when spraying isn't an option
- LaserFlex Heat Transfer Sample Kit - An alternative to the CerMark Tape
- LaserBond - Another alternative to CerMark Spray
- Brilliance Laser Inks - Alternative to CerMark Spray but also has a powder option
Box Generators
https://makerdesignlab.com/tutorials-tips/online-file-generators-for-laser-cutting/
https://boxmaker.connectionlab.org/
https://boxdesigner.connectionlab.org
http://boxdesigner.frag-den-spatz.de/
https://community.glowforge.com/t/tab-box-generator/7222
https://www.festi.info/boxes.py/
https://github.com/Neon22/inkscape-LasercutBox
https://github.com/BvdP/elliptical-box-maker/
https://github.com/paulh-rnd/TabbedBoxMaker
https://www.instructables.com/id/Generating-elliptical-boxes-using-a-laser-cutter-a/
https://www.instructables.com/id/Joinery-Joints-for-Laser-Cut-Assemblies/
http://joostn.github.io/OpenJsCad/ - Gear generator
http://www.reidb.net/LaserLivingHinges.html
