Boss LS-3655: Difference between revisions

Revision as of 00:51, 6 August 2019

ATX Hackerspace Materials List - Until we have our own list, refer to this list for what's safe/not safe to use on the laser
Boss Laser Manuals Downloads - LS Machine Operations. LS QuickStart Guide, LaserWORKS, Rotary
Boss Laser Materials Recommended Settings - Use settings for 100W
LightBurn Software Manual - Documentation for the LightBurn software
LightBurn Tutorials

If you want to set up the Boss LS-3655 in LightBurn or another program, here are the settings you need:

1400mm x 900mm
Home is rear-right position
100W (don't think this is a configuration option, just good to know for selecting power settings per Recommended Settings)

@@ Line 1: / Line 1: @@
+== Useful Links ==
 * [http://atxhackerspace.org/wiki/Laser_Cutter_Materials ATX Hackerspace Materials List] - Until we have our own list, refer to this list for what's safe/not safe to use on the laser
 * [https://www.bosslaser.com/download-manuals-guides/ Boss Laser Manuals Downloads] - LS Machine Operations. LS QuickStart Guide, LaserWORKS, Rotary
@@ Line 4: / Line 5: @@
 * [https://lightburnsoftware.com/pages/lightburn-documentation LightBurn Software Manual] - Documentation for the LightBurn software
 * [https://lightburnsoftware.com/pages/tutorials LightBurn Tutorials]
+== Laser Parameters ==
+If you want to set up the Boss LS-3655 in LightBurn or another program, here are the settings you need:
+* 1400mm x 900mm
+* Home is rear-right position
+* 100W (don't think this is a configuration option, just good to know for selecting power settings per Recommended Settings)