Boss LS-3655: Difference between revisions
From Annapolis Makerspace Wiki
| (38 intermediate revisions by 3 users not shown) | |||
| Line 3: | Line 3: | ||
* [https://lightburnsoftware.com/pages/lightburn-documentation LightBurn Software Manual] - Documentation for the LightBurn software | * [https://lightburnsoftware.com/pages/lightburn-documentation LightBurn Software Manual] - Documentation for the LightBurn software | ||
* [https://lightburnsoftware.com/pages/tutorials LightBurn Tutorials] | * [https://lightburnsoftware.com/pages/tutorials LightBurn Tutorials] | ||
* [https://forum.lightburnsoftware.com/t/rotary-issue-y-axis/1827 Preventing Homing on Laser] - Press ESC to cancel the homing sequence, after the controller beeps (carriage may start moving a split second before that) | |||
== Recommended Settings == | == Recommended Settings == | ||
* [[Media:Boss_LS-3655_100W_Lightburn_Cut_Library.clb|Boss LS-3655 100W Lightburn Cut Library, updated 11/15/2019]] - Lightburn Library with Boss Recommended Settings and more | * [[Media:Boss_LS-3655_100W_Lightburn_Cut_Library.clb|Boss LS-3655 100W Lightburn Cut Library, updated 11/15/2019]] - Lightburn Library with Boss Recommended Settings and more NOTE: If the downloaded file is a .xml, rename it to be .clb extension | ||
* [https://www.bosslaser.com/laser-settings/ Boss Laser Materials Recommended Settings] - Use settings for 100W | * [https://www.bosslaser.com/laser-settings/ Boss Laser Materials Recommended Settings] - Use settings for 100W | ||
* [https://nova-labs.org/wiki/_media/equipment/hurricane-charley-material-settings.pdf NoVA Labs Recommended Settings For Their 100W Laser] | * [https://nova-labs.org/wiki/_media/equipment/hurricane-charley-material-settings.pdf NoVA Labs Recommended Settings For Their 100W Laser] | ||
| Line 17: | Line 18: | ||
* [https://www.epiloglaser.com/resources/sample-club/slate-coasters-laser-engraving.htm Laser Cutting Slate Coasters] | * [https://www.epiloglaser.com/resources/sample-club/slate-coasters-laser-engraving.htm Laser Cutting Slate Coasters] | ||
* [https://www.bosslaser.com/laser-engraving-stone Laser Engraving Stone] - Great list of various stones that Boss recommends for engraving, as well as tips | * [https://www.bosslaser.com/laser-engraving-stone Laser Engraving Stone] - Great list of various stones that Boss recommends for engraving, as well as tips | ||
== Safety == | |||
* [http://www.makeitlabs.com/blog/test-early-test-often-laser-materials-safety-intro MakeItLabs Laser Materials Safety Intro] | |||
== Laser Parameters == | == Laser Parameters == | ||
If you want to set up the Boss LS-3655 in LightBurn or another program, here are the settings you need: | If you want to set up the Boss LS-3655 in LightBurn or another program, here are the settings you need: | ||
* Type: Ruida | * Type: Ruida | ||
* Connection: | * Connection: USB (Best to use this setting but transfer the file to computer already connect to Boss, rather than moving USB) | ||
* 1400mm x 900mm | * 1400mm x 900mm | ||
* Home is rear-right position | * Home is rear-right position | ||
| Line 27: | Line 31: | ||
== Software == | == Software == | ||
* [https://lightburnsoftware.com Lightburn] - Makerspace members receive a significant discount on a license for their own computer, where they can prepare Lightburn files at their convenience. These files can later be uploaded to the laser's computer at the makerspace. Inquire on our Slack channel for more details. | |||
== Example Projects == | == Example Projects == | ||
| Line 47: | Line 43: | ||
== Design Sites == | == Design Sites == | ||
=== Pay Sites === | |||
* [https://laser-templates.com Laser Templates] - Inexpensive designs fully usable for both personal and commercial products | * [https://laser-templates.com Laser Templates] - Inexpensive designs fully usable for both personal and commercial products | ||
* [https://www.etsy.com/shop/Vasily39 Laser Cutting Templates by Vasily39 on Etsy] | |||
=== Free Sites === | |||
* [https://www.dxfforcnc.com/collections/free-dxf-files DXFforCNC] | * [https://www.dxfforcnc.com/collections/free-dxf-files DXFforCNC] | ||
* [http://www.readytocut.com/community/forums/cnc-art-file-sharing.136/ Ready To Cut] - CNC Art Files For Sharing | * [http://www.readytocut.com/community/forums/cnc-art-file-sharing.136/ Ready To Cut] - CNC Art Files For Sharing | ||
| Line 57: | Line 56: | ||
* [https://www.designshop.com/search/free-cnc-project-files.html DesignShop Free CNC Project Files] | * [https://www.designshop.com/search/free-cnc-project-files.html DesignShop Free CNC Project Files] | ||
* [http://wood-toolbox.com/ Wood Toolbox] - Templates for lasers and CNCs | * [http://wood-toolbox.com/ Wood Toolbox] - Templates for lasers and CNCs | ||
* [https://www.makecnc.com/welcome.php MakeCNC] | |||
== Design Tools == | |||
* [https://suncatcherstudio.com/ Stencil Generator from Suncatcher Studio] | |||
* [http://flatfab.com/ FlatFab] | |||
* [https://www.luban3d.com/ LubAn 3D] - Tons of different tools for creating or processing 3D models for 3D printing, CNC and laser cutting | |||
* [https://polygonia.design/ Polygonia Design Suite] - Rapidly Create Symmetrical Designs for Manufacturing | |||
* [http://www.photo2stencil.com/ Photo 2 Stencil] | |||
* [[Boss LS-3655#Box_Generators|Box Generators]] | |||
== Useful Tools == | == Useful Tools == | ||
* [https://www.ponoko.com/blog/digital-manufacturing/definitive-guide-nesting-software-laser-cut-designs/ Definitive Guide to Nesting Software for Laser Cut Designs] | * [https://www.ponoko.com/blog/digital-manufacturing/definitive-guide-nesting-software-laser-cut-designs/ Definitive Guide to Nesting Software for Laser Cut Designs] | ||
* [https://kpc29laser.fr/MGL/MGL.html Multi Generator 2.2.2 Online] - Generates test files for power, acceleration, DPI, cut, kerf, depth, grid placement | |||
== Materials Links == | == Materials Links == | ||
* [https:// | === Wood === | ||
* [https://ocoochhardwoods.com Ocooch Hardwoods] - Suppliers of thin wood and plywood for scroll sawing, carving, intarsia, wood turning, laser cutting and engraving, thick veneers and much more. | |||
* [https://www.woodcraft.com/ WoodCraft] | |||
=== Acrylic === | |||
* [https://www.usplastic.com/catalog/default.aspx?catid=442&parentcatid=443 USPlastics Acrylic] | * [https://www.usplastic.com/catalog/default.aspx?catid=442&parentcatid=443 USPlastics Acrylic] | ||
* [https://www.engraving-supplies.com/ TroTec Engraving Supplies] - Including two-color acrylics like Rowmark | * [https://www.engraving-supplies.com/ TroTec Engraving Supplies] - Including two-color acrylics like Rowmark | ||
* [https:// | * [https://www.ebay.com/str/plasticsacrylic plasticsacrylic on eBay] - (NOTE: Sometimes hefty shipping fees but can combine orders) Has some thinner (1/16") acrylic not found in other sources, also has a wide selection of other interesting acrylics including various colors of mirrored | ||
* [https://www.engraversjournal.com/article.php/3179/index.html The Scoop On Plastic Substrates] | |||
* [https://www.cohnacrylics.com/ COHn Acrylics] | |||
=== Various === | |||
* [https://www.xtool.com/pages/xtool-selected-materials XTool] - Acrylic, fancy plywood | |||
* [https://www.inventables.com/categories/materials Inventables] - Acrylic, circuit board blanks, corian, machinable wax and foam, metal, plastic, stamping, wood & mdf | * [https://www.inventables.com/categories/materials Inventables] - Acrylic, circuit board blanks, corian, machinable wax and foam, metal, plastic, stamping, wood & mdf | ||
* [https://www.rowmark.com/products RowMark] - Lots of different specialty materials including wood and acrylic for lasers | |||
* [https://smokeyhilldesigns.com/ Smoke Hill Designs] - Wood and acrylic for lasers | |||
* [https://modfy.build/ Modfy] - Wood and acrylic for lasers, lots of different patterns and colors | |||
=== Other === | |||
* [https://browse.jdsindustries.com/main.php?r=frontEnd&view=front&jds-category1=16&jds-category1-desc=Laserable+Leatherette JDS Industries] - Laserable Leatherette | |||
=== Engraving/Finishing === | |||
* [https://www.jpplus.com/stone-color-fill-kit-5-colors Stone Color Fill] - Soaks into pores of stone that's been laser engraved | * [https://www.jpplus.com/stone-color-fill-kit-5-colors Stone Color Fill] - Soaks into pores of stone that's been laser engraved | ||
* [https://www.jpplus.com/6-x-25-engravable-laser-foil Laser Foil] | * [https://www.jpplus.com/6-x-25-engravable-laser-foil Laser Foil] | ||
* [https://www. | * [https://www.jpplus.com/engraving/fabrication/marking/laserflex-heat-transfer-sample-kit Laser heat transfer foil sheet] | ||
* [https://www.cermark.com/ CerMark Spray] - For marking typically un-markable metal with the laser. Binds the spray material to the metal | |||
* [https://smile.amazon.com/CRC-03084-Lubricant-Aerosol-Spray/dp/B0013J62P4 CRC Dry Moly Lube] - Cheap alternative to CerMark Spray | |||
* [https://www.jpplus.com/cermark-metal-marking-tape CerMark Tape] - An alternative for when spraying isn't an option | |||
* [https://www.jpplus.com/engraving/fabrication/marking/laserflex-heat-transfer-sample-kit LaserFlex Heat Transfer Sample Kit] - An alternative to the CerMark Tape | |||
* [https://www.laserbondingtech.com/order LaserBond] - Another alternative to CerMark Spray | |||
* [https://brilliancelaserinks.com/ Brilliance Laser Inks] - Alternative to CerMark Spray but also has a powder option | |||
== Box Generators (updated 9/7/2024) == | |||
[https://makerdesignlab.com/tutorials-tips/online-file-generators-for-laser-cutting/ MakerDesignLab Tools List] - Great list of online tools for creating boxes, gears, labyrinths, jigsaw puzzles, etc | |||
[https://www.festi.info/boxes.py/ Boxes.py] redirects to [https://boxes.hackerspace-bamberg.de/ boxes.hackerspace-bamberg.de] - TONS of boxes/etc. A+++ | |||
[https://www.makercase.com MakerCase] - Simple Boxes, Polygon Boxes with 3 or more sides, Boxes with round corners, Boxes with dividers. Very good but simple online box generator | |||
[https://www.templatemaker.nl/en/ TemplateMaker] - Design tool to make templates for tons of paper boxes and such | |||
[https://boxdesigner.connectionlab.org Box Designer at ConnecitonLab] | |||
[http://boxdesigner.frag-den-spatz.de/ boxdesigner at frag-de-spatz.de] | |||
[https://community.glowforge.com/t/tab-box-generator/7222 Tab-Box Generator on GlowForge community] | |||
[https://github.com/Neon22/inkscape-LasercutBox Inkscape-LasercutBox by Neon22] | |||
[https://github.com/BvdP/elliptical-box-maker/ elliptical-box-maker by BvdP] | |||
https:// | |||
https:// | [https://github.com/paulh-rnd/TabbedBoxMaker TabbedBoxMaker by paulh-md] | ||
https:// | [https://imagio.dk/boxmaker/ BoxMaker at Imagio.dk] | ||
https://www. | [https://www.instructables.com/id/Generating-elliptical-boxes-using-a-laser-cutter-a/ Generating Elliptical Boxes Using a Laser Cutter and Inkscape] | ||
https:// | [https://www.instructables.com/id/Joinery-Joints-for-Laser-Cut-Assemblies/ Joinery: Joints for Laser Cut Assemblies] | ||
[http://joostn.github.io/OpenJsCad/ OpenJsCad Gear generator] | |||
[http://jeromeleary.com/laser/ Laser Cut Box Generator at Jeromeleary.com] | |||
http://jeromeleary.com/laser/ | |||
[http://www.reidb.net/LaserLivingHinges.html Tabbed Boxes with Living Hinges] | |||
[https://www.thingiverse.com/thing:255013 Parametric box maker for lasercut on Thingiverse] | |||
https://www.thingiverse.com/thing: | [https://www.thingiverse.com/thing:404 Box-o-Tron 1.0 on Thingiverse] | ||
Latest revision as of 17:25, 7 September 2024
Useful Links
- Boss Laser Manuals Downloads - LS Machine Operations. LS QuickStart Guide, LaserWORKS, Rotary
- LightBurn Software Manual - Documentation for the LightBurn software
- LightBurn Tutorials
- Preventing Homing on Laser - Press ESC to cancel the homing sequence, after the controller beeps (carriage may start moving a split second before that)
Recommended Settings
- Boss LS-3655 100W Lightburn Cut Library, updated 11/15/2019 - Lightburn Library with Boss Recommended Settings and more NOTE: If the downloaded file is a .xml, rename it to be .clb extension
- Boss Laser Materials Recommended Settings - Use settings for 100W
- NoVA Labs Recommended Settings For Their 100W Laser
Material Guides
- ATX Hackerspace Materials List - Until we have our own list, refer to this list for what's safe/not safe to use on the laser
- Epilog Materials Compatibility List
- Universal Laser Materials Library
- FullSpectrum Laser Wood List - List of woods that FSLaser recommends/doesn't recommend
- AP Lazer - How To Choose The Best Wood For Laser Engraving
- Laser Cutting Slate Coasters
- Laser Engraving Stone - Great list of various stones that Boss recommends for engraving, as well as tips
Safety
Laser Parameters
If you want to set up the Boss LS-3655 in LightBurn or another program, here are the settings you need:
- Type: Ruida
- Connection: USB (Best to use this setting but transfer the file to computer already connect to Boss, rather than moving USB)
- 1400mm x 900mm
- Home is rear-right position
- 100W (don't think this is a configuration option, just good to know for selecting power settings per Recommended Settings)
Software
- Lightburn - Makerspace members receive a significant discount on a license for their own computer, where they can prepare Lightburn files at their convenience. These files can later be uploaded to the laser's computer at the makerspace. Inquire on our Slack channel for more details.
Example Projects
- Boss Laser Ideas Boss Laser Project Downloads
- Universal Laser Examples
- Epilog's Sample Club Projects
- Designs By Phil Glowforge Projects
- Thingiverse - BrianHanifin Glowforge Projects
- Latest Made Glowforge Project Ideas
- Inventables Project Ideas
Design Sites
Pay Sites
- Laser Templates - Inexpensive designs fully usable for both personal and commercial products
- Laser Cutting Templates by Vasily39 on Etsy
Free Sites
- DXFforCNC
- Ready To Cut - CNC Art Files For Sharing
- CNC File Sharing
- 3axis.co - Free vector files for laser cutting
- CNC Cookbook Free DXF Files
- FileCNC Free Vector Files for CNC
- Scan2CAD Free DXF Files
- DesignShop Free CNC Project Files
- Wood Toolbox - Templates for lasers and CNCs
- MakeCNC
Design Tools
- Stencil Generator from Suncatcher Studio
- FlatFab
- LubAn 3D - Tons of different tools for creating or processing 3D models for 3D printing, CNC and laser cutting
- Polygonia Design Suite - Rapidly Create Symmetrical Designs for Manufacturing
- Photo 2 Stencil
- Box Generators
Useful Tools
- Definitive Guide to Nesting Software for Laser Cut Designs
- Multi Generator 2.2.2 Online - Generates test files for power, acceleration, DPI, cut, kerf, depth, grid placement
Materials Links
Wood
- Ocooch Hardwoods - Suppliers of thin wood and plywood for scroll sawing, carving, intarsia, wood turning, laser cutting and engraving, thick veneers and much more.
- WoodCraft
Acrylic
- USPlastics Acrylic
- TroTec Engraving Supplies - Including two-color acrylics like Rowmark
- plasticsacrylic on eBay - (NOTE: Sometimes hefty shipping fees but can combine orders) Has some thinner (1/16") acrylic not found in other sources, also has a wide selection of other interesting acrylics including various colors of mirrored
- The Scoop On Plastic Substrates
- COHn Acrylics
Various
- XTool - Acrylic, fancy plywood
- Inventables - Acrylic, circuit board blanks, corian, machinable wax and foam, metal, plastic, stamping, wood & mdf
- RowMark - Lots of different specialty materials including wood and acrylic for lasers
- Smoke Hill Designs - Wood and acrylic for lasers
- Modfy - Wood and acrylic for lasers, lots of different patterns and colors
Other
- JDS Industries - Laserable Leatherette
Engraving/Finishing
- Stone Color Fill - Soaks into pores of stone that's been laser engraved
- Laser Foil
- Laser heat transfer foil sheet
- CerMark Spray - For marking typically un-markable metal with the laser. Binds the spray material to the metal
- CRC Dry Moly Lube - Cheap alternative to CerMark Spray
- CerMark Tape - An alternative for when spraying isn't an option
- LaserFlex Heat Transfer Sample Kit - An alternative to the CerMark Tape
- LaserBond - Another alternative to CerMark Spray
- Brilliance Laser Inks - Alternative to CerMark Spray but also has a powder option
Box Generators (updated 9/7/2024)
MakerDesignLab Tools List - Great list of online tools for creating boxes, gears, labyrinths, jigsaw puzzles, etc
Boxes.py redirects to boxes.hackerspace-bamberg.de - TONS of boxes/etc. A+++
MakerCase - Simple Boxes, Polygon Boxes with 3 or more sides, Boxes with round corners, Boxes with dividers. Very good but simple online box generator
TemplateMaker - Design tool to make templates for tons of paper boxes and such
boxdesigner at frag-de-spatz.de
Tab-Box Generator on GlowForge community
Inkscape-LasercutBox by Neon22
Generating Elliptical Boxes Using a Laser Cutter and Inkscape
Joinery: Joints for Laser Cut Assemblies
Laser Cut Box Generator at Jeromeleary.com
Tabbed Boxes with Living Hinges