Two Original Prusa MK4S's with enclosure
From Annapolis Makerspace Wiki
Original Prusa MK4S with enclosure
- About Prusa Research
- MK4S Vendor web site
- Prusa MK4S Printer Handbook - a detailed guide to printer setup, PrusaSlicer, and print management
- Nozzles installed:
- Printer "Alfa": 0.4mm HF(High Flow)
- Printer "Bravo": 0.6mm HF
- Nozzles available on request:
- 0.25mm brass for fine detail
- 0.6mm hardened for carbon fiber or other abrasive material