Original Prusa XL 5-Tool: Difference between revisions
From Annapolis Makerspace Wiki
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
* Build area: 360x360x360mm | * Build area: 360x360x360mm | ||
* Nozzles installed: 0.4mm or 0.4mm HF(High Flow) | * Nozzles installed: 0.4mm or 0.4mm HF(High Flow) | ||
* Nozzles available on request: 0.25mm brass for fine detail | 0.6mm hardened for carbon fiber or other abrasive materials | * Nozzles available on request: 0.25mm brass for fine detail | 0.6mm hardened for carbon fiber or other abrasive materials | 0.6mm High Flow | 0.8mm brass | ||
Latest revision as of 12:40, 30 November 2025
Original Prusa XL 5-Tool printer with enclosure
- About Prusa Research
- Vendor site for Prusa XL 5-tool printer
- Vendor site for Prusa XL Enclosure
- Prusa XL printer handbook - a detailed guide to printer setup, PrusaSlicer, and print management
- Build area: 360x360x360mm
- Nozzles installed: 0.4mm or 0.4mm HF(High Flow)
- Nozzles available on request: 0.25mm brass for fine detail | 0.6mm hardened for carbon fiber or other abrasive materials | 0.6mm High Flow | 0.8mm brass