Original Prusa XL 5-Tool: Difference between revisions
From Annapolis Makerspace Wiki
Created page with "Original Prusa XL 5-Tool From Annapolis Makerspace Wiki Original Prusa XL 5-Tool printer with enclosure 500px/ Original Prusa 5-toolhead 3D Printer About Prusa Research Vendor site for Prusa XL 5-tool printer Vendor site for Prusa XL Enclosure Prusa XL printer handbook - a detailed guide to printer setup, PrusaSlicer, and print management Build area: 360x360x360mm Nozzles installed: 0.4mm or 0.4mm HF(High Flow) Nozzles available on request: 0.25mm brass for fine detai..." |
No edit summary |
||
| Line 1: | Line 1: | ||
Original Prusa XL | Original Prusa XL 2-Tool printer with enclosure (5-Tool shown) | ||
500px/ Original Prusa | [[File:xlenclosure.jpg|500px/ Original Prusa 2-toolhead 3D Printer]] | ||
* [https://www.prusa3d.com/page/about-us_77/ About Prusa Research] | |||
About Prusa Research | * [https://www.prusa3d.com/en/product/original-prusa-xl-semi-assembled-2-toolhead-3d-printer/ Vendor site for Prusa XL 2-tool printer] | ||
Vendor site for Prusa XL | * [https://www.prusa3d.com/product/original-prusa-xl-enclosure-3/ Vendor site for Prusa XL Enclosure] | ||
Vendor site for Prusa XL Enclosure | * [https://drive.google.com/file/d/1x61VIsvE0UPc1NNSb0XrWEivj9QbJIeq/view?usp=drive_link Prusa XL printer handbook - a detailed guide to printer setup, PrusaSlicer, and print management] | ||
Prusa XL printer handbook - a detailed guide to printer setup, PrusaSlicer, and print management | * Build area: 360x360x360mm | ||
Build area: 360x360x360mm | * Nozzles installed: 0.4mm or 0.4mm HF(High Flow) | ||
Nozzles installed: 0.4mm or 0.4mm HF(High Flow) | * Nozzles available on request: 0.25mm brass for fine detail | 0.6mm hardened for carbon fiber or other abrasive materials and faster prints | ||
Nozzles available on request: 0.25mm brass for fine detail | 0.6mm hardened for carbon fiber or other abrasive materials and faster prints | |||
Revision as of 12:35, 30 November 2025
Original Prusa XL 2-Tool printer with enclosure (5-Tool shown)
- About Prusa Research
- Vendor site for Prusa XL 2-tool printer
- Vendor site for Prusa XL Enclosure
- Prusa XL printer handbook - a detailed guide to printer setup, PrusaSlicer, and print management
- Build area: 360x360x360mm
- Nozzles installed: 0.4mm or 0.4mm HF(High Flow)
- Nozzles available on request: 0.25mm brass for fine detail | 0.6mm hardened for carbon fiber or other abrasive materials and faster prints