Two Original Prusa MK4S's with enclosure: Difference between revisions
From Annapolis Makerspace Wiki
mNo edit summary |
mNo edit summary |
||
| Line 7: | Line 7: | ||
* Nozzles installed: | * Nozzles installed: | ||
** Printer "Alfa": 0.4mm HF(High Flow) = greater detail than "Bravo" | ** Printer "Alfa": 0.4mm HF(High Flow) = greater detail than "Bravo" | ||
** Printer "Bravo": 0.6mm HF = less detail but faster prints = reduction of print time by about 40% | ** Printer "Bravo": 0.6mm HF = less detail but faster prints than "Alfa" = reduction of print time by about 40% | ||
* Other than nozzle specs, the two MK4S printers have identical hardware and software | * Other than nozzle specs, the two MK4S printers have identical hardware and software | ||
* Nozzles available on request: | * Nozzles available on request: | ||
** 0.25mm brass for fine detail | ** 0.25mm brass for fine detail | ||
** 0.6mm hardened for carbon fiber or other abrasive material | ** 0.6mm hardened for carbon fiber or other abrasive material | ||
Latest revision as of 18:54, 18 June 2025
Original Prusa MK4S with enclosure
- About Prusa Research
- Prusa MK4S Vendor web site
- Prusa MK4S Printer Handbook - a detailed guide to printer setup, PrusaSlicer, and print management
- Nozzles installed:
- Printer "Alfa": 0.4mm HF(High Flow) = greater detail than "Bravo"
- Printer "Bravo": 0.6mm HF = less detail but faster prints than "Alfa" = reduction of print time by about 40%
- Other than nozzle specs, the two MK4S printers have identical hardware and software
- Nozzles available on request:
- 0.25mm brass for fine detail
- 0.6mm hardened for carbon fiber or other abrasive material