Two Original Prusa MK4S's with enclosure: Difference between revisions
From Annapolis Makerspace Wiki
mNo edit summary |
mNo edit summary |
||
| Line 4: | Line 4: | ||
* [https://www.prusa3d.com/page/about-us_77/ About Prusa Research] | * [https://www.prusa3d.com/page/about-us_77/ About Prusa Research] | ||
* [https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer/ MK4S Vendor web site] | * [https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer/ MK4S Vendor web site] | ||
* Nozzles installed: Printer "Alfa": 0.4mm HF(High Flow) | * Nozzles installed: | ||
* Nozzles available on request: 0.25mm brass for fine detail | ** Printer "Alfa": 0.4mm HF(High Flow) | ||
** Printer "Bravo": 0.6mm HF | |||
* Nozzles available on request: | |||
** 0.25mm brass for fine detail | |||
** 0.6mm hardened for carbon fiber or other abrasive material | |||
Revision as of 19:44, 13 June 2025
Original Prusa MK4S with enclosure
- About Prusa Research
- MK4S Vendor web site
- Nozzles installed:
- Printer "Alfa": 0.4mm HF(High Flow)
- Printer "Bravo": 0.6mm HF
- Nozzles available on request:
- 0.25mm brass for fine detail
- 0.6mm hardened for carbon fiber or other abrasive material