User experience: Difference between revisions
From Annapolis Makerspace Wiki
mNo edit summary |
mNo edit summary |
||
| Line 4: | Line 4: | ||
===== Wide range of filaments supported ===== | ===== Wide range of filaments supported ===== | ||
Our Prusa printers support filament types PLA, PETG, ASA, PC, PVB, ABS, HIPS, PP, FLEX(TPU), PA, and user-defined custom types, usually on 1gm rolls or less of 1.75mm diameter filament. | Our Prusa printers support filament types PLA, PETG, ASA, PC, PVB, ABS, HIPS, PP, FLEX(TPU), PA, CF and user-defined custom types, usually on 1gm rolls or less of 1.75mm diameter filament. | ||
===== Online print scheduling ===== | ===== Online print scheduling ===== | ||
Revision as of 20:49, 10 June 2025
Printer enclosures with HEPA filters
For the safety of our members, HEPA air filtration is available in the enclosures, especially needed for use with high temperature filaments like ABS, ASA, and PETG.
Wide range of filaments supported
Our Prusa printers support filament types PLA, PETG, ASA, PC, PVB, ABS, HIPS, PP, FLEX(TPU), PA, CF and user-defined custom types, usually on 1gm rolls or less of 1.75mm diameter filament.
Online print scheduling
Scheduling is required for all prints to prevent usage conflicts. The purpose is to communicate the reserved time to other members who also might be interested in using the printer. It especially helps those traveling to the shop to be assured that the printer will be available when they arrive.
Printers must be scheduled/reserved for the entire time the printer is set up for a future remote print (see "Online print control and monitoring" below) with a clean plate and the member's filament loaded.
The web based TeamUp app is used and is accessible from any device. Members receive an ID and password for access to the teamup app.