Original Prusa XL 5-Tool: Difference between revisions
From Annapolis Makerspace Wiki
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
[[File:xlenclosure.jpg|500px/ Original Prusa 2-toolhead 3D Printer]] | [[File:xlenclosure.jpg|500px/ Original Prusa 2-toolhead 3D Printer]] | ||
* [https://www.prusa3d.com/page/about-us_77/ About Prusa Research] | * [https://www.prusa3d.com/page/about-us_77/ About Prusa Research] | ||
* [https://www.prusa3d.com/en/product/original-prusa-xl | * [https://www.prusa3d.com/en/product/original-prusa-xl-assembled-5-toolhead-3d-printer-enclosure-bundle/ Vendor site for Prusa XL 5-tool printer] | ||
* [https://www.prusa3d.com/product/original-prusa-xl-enclosure-3/ Vendor site for Prusa XL Enclosure] | * [https://www.prusa3d.com/product/original-prusa-xl-enclosure-3/ Vendor site for Prusa XL Enclosure] | ||
* [https://drive.google.com/file/d/1x61VIsvE0UPc1NNSb0XrWEivj9QbJIeq/view?usp=drive_link Prusa XL printer handbook - a detailed guide to printer setup, PrusaSlicer, and print management] | * [https://drive.google.com/file/d/1x61VIsvE0UPc1NNSb0XrWEivj9QbJIeq/view?usp=drive_link Prusa XL printer handbook - a detailed guide to printer setup, PrusaSlicer, and print management] | ||
Revision as of 12:39, 30 November 2025
Original Prusa XL 5-Tool printer with enclosure
- About Prusa Research
- Vendor site for Prusa XL 5-tool printer
- Vendor site for Prusa XL Enclosure
- Prusa XL printer handbook - a detailed guide to printer setup, PrusaSlicer, and print management
- Build area: 360x360x360mm
- Nozzles installed: 0.4mm or 0.4mm HF(High Flow)
- Nozzles available on request: 0.25mm brass for fine detail | 0.6mm hardened for carbon fiber or other abrasive materials and faster prints