Two Original Prusa MK4S's with enclosure: Difference between revisions
From Annapolis Makerspace Wiki
mNo edit summary |
mNo edit summary |
||
| Line 4: | Line 4: | ||
* [https://www.prusa3d.com/page/about-us_77/ About Prusa Research] | * [https://www.prusa3d.com/page/about-us_77/ About Prusa Research] | ||
* [https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer/ MK4S Vendor web site] | * [https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer/ MK4S Vendor web site] | ||
* [https://drive.google.com/file/d/1_J2KPhBqiLp4gUN8LRULSq1Vk9dc8ujj/view?usp=drive_link MK4S Printer Handbook] | * [https://drive.google.com/file/d/1_J2KPhBqiLp4gUN8LRULSq1Vk9dc8ujj/view?usp=drive_link MK4S Printer Handbook - a detailed guide to printer setup, PrusaSlicer, and print management] | ||
* Nozzles installed: | * Nozzles installed: | ||
** Printer "Alfa": 0.4mm HF(High Flow) | ** Printer "Alfa": 0.4mm HF(High Flow) | ||
Revision as of 15:03, 16 June 2025
Original Prusa MK4S with enclosure
- About Prusa Research
- MK4S Vendor web site
- MK4S Printer Handbook - a detailed guide to printer setup, PrusaSlicer, and print management
- Nozzles installed:
- Printer "Alfa": 0.4mm HF(High Flow)
- Printer "Bravo": 0.6mm HF
- Nozzles available on request:
- 0.25mm brass for fine detail
- 0.6mm hardened for carbon fiber or other abrasive material