Original Prusa XL 2-Tool: Difference between revisions
From Annapolis Makerspace Wiki
Created page with "Original Prusa XL with enclosure (5 Tool shown) * 500px/ Original Prusa 2-toolhead 3D Printer" |
mNo edit summary |
||
| (19 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
Original Prusa XL with enclosure (5 Tool shown) | Original Prusa XL 2-Tool printer with enclosure (5-Tool shown) | ||
[[File:xlenclosure.jpg|500px/ Original Prusa 2-toolhead 3D Printer]] | |||
* [https://www.prusa3d.com/page/about-us_77/ About Prusa Research] | |||
* [https://www.prusa3d.com/en/product/original-prusa-xl-semi-assembled-2-toolhead-3d-printer/ Vendor site for Prusa XL 2-tool printer] | |||
* [https://www.prusa3d.com/product/original-prusa-xl-enclosure-3/ Vendor site for Prusa XL Enclosure] | |||
* [https://drive.google.com/file/d/1x61VIsvE0UPc1NNSb0XrWEivj9QbJIeq/view?usp=drive_link Prusa XL printer handbook - a detailed guide to printer setup, PrusaSlicer, and print management] | |||
* Build area: 360x360x360mm | |||
* Nozzles installed: 0.4mm or 0.4mm HF(High Flow) | |||
* Nozzles available on request: 0.25mm brass for fine detail | 0.6mm hardened for carbon fiber or other abrasive materials and faster prints | |||
Latest revision as of 15:12, 16 June 2025
Original Prusa XL 2-Tool printer with enclosure (5-Tool shown)
- About Prusa Research
- Vendor site for Prusa XL 2-tool printer
- Vendor site for Prusa XL Enclosure
- Prusa XL printer handbook - a detailed guide to printer setup, PrusaSlicer, and print management
- Build area: 360x360x360mm
- Nozzles installed: 0.4mm or 0.4mm HF(High Flow)
- Nozzles available on request: 0.25mm brass for fine detail | 0.6mm hardened for carbon fiber or other abrasive materials and faster prints