Two Original Prusa MK4S's with enclosure: Difference between revisions
From Annapolis Makerspace Wiki
mNo edit summary |
mNo edit summary |
||
| (19 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
Original Prusa MK4S with enclosure | Original Prusa MK4S with enclosure | ||
[[File: | [[File:MK4S_enclosure.jpeg|500px]] | ||
* [https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer/ Vendor web site] | * [https://www.prusa3d.com/page/about-us_77/ About Prusa Research] | ||
* [https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer/ Prusa MK4S Vendor web site] | |||
* [https://drive.google.com/file/d/1_J2KPhBqiLp4gUN8LRULSq1Vk9dc8ujj/view?usp=drive_link Prusa MK4S Printer Handbook - a detailed guide to printer setup, PrusaSlicer, and print management] | |||
* Nozzles installed: | |||
** Printer "Alfa": 0.4mm HF(High Flow) = greater detail than "Bravo" | |||
** Printer "Bravo": 0.6mm HF = less detail but faster prints than "Alfa" = reduction of print time by about 40% | |||
* Other than nozzle specs, the two MK4S printers have identical hardware and software | |||
* Nozzles available on request: | |||
** 0.25mm brass for fine detail | |||
** 0.6mm hardened for carbon fiber or other abrasive material | |||
Latest revision as of 18:54, 18 June 2025
Original Prusa MK4S with enclosure
- About Prusa Research
- Prusa MK4S Vendor web site
- Prusa MK4S Printer Handbook - a detailed guide to printer setup, PrusaSlicer, and print management
- Nozzles installed:
- Printer "Alfa": 0.4mm HF(High Flow) = greater detail than "Bravo"
- Printer "Bravo": 0.6mm HF = less detail but faster prints than "Alfa" = reduction of print time by about 40%
- Other than nozzle specs, the two MK4S printers have identical hardware and software
- Nozzles available on request:
- 0.25mm brass for fine detail
- 0.6mm hardened for carbon fiber or other abrasive material