Difference between revisions of "Prusa i3 MK3S"

From Annapolis Makerspace Wiki
Jump to: navigation, search
Line 17: Line 17:
 
* Supported Materials: [https://help.prusa3d.com/materials | Prusa Material Table]
 
* Supported Materials: [https://help.prusa3d.com/materials | Prusa Material Table]
  
PLEASE NOTE the cleaning/adhesion methods on the "printable on satin sheet" column in the Prusa Material Table
+
PLEASE NOTE the cleaning and adhesion methods on the "printable on satin sheet" column in the Prusa Material Table
  
 
DO NOT CLEAN WITH ACETONE!!!!   
 
DO NOT CLEAN WITH ACETONE!!!!   
  
  
 +
TROUBLESHOOTING
 +
 +
It's important to have all mechanical parts of the printer perfectly assembled and keep pulley drive clean.
 +
 +
Use following links covering most common problems :
 +
 +
* [https://prusa3d.dozuki.com/Guide/Unable+to+unload+filament/375 | Unable to unload filament
 +
* [https://prusa3d.dozuki.com/Guide/Multiplexer/374 | Multiplexer troubleshooting
 +
* [https://prusa3d.dozuki.com/Guide/Pulleys/373 | Extruder troubleshooting
 +
* [https://help.prusa3d.com/guide/filament-jam-mmu2s_85936| Filament Jam]
 +
* [http://prusa3d.com/downloads/manual/prusa3d_manual_mmu2s_eng_1_00.pdf?| Print Quality Troubleshooting]
 +
 +
For more detailed troubleshooting and repair, please consult the Prusa 3d manual at the link below.
  
 
VENDOR RESOURCES:
 
VENDOR RESOURCES:
 
*[https://www.prusa3d.com/ Vendor website]
 
*[https://www.prusa3d.com/ Vendor website]
 
*[[Media:Prusa3d_manual.pdf|Prusa i3 MKS3 manual]]
 
*[[Media:Prusa3d_manual.pdf|Prusa i3 MKS3 manual]]

Revision as of 10:10, 6 August 2022

Prusa3Dstock.png

The Prusa i3 MK3S+ is one of Prusa's award-winning 3D printers.

FEATURES:

  • Heatbed with removable PEI spring steel print sheets,
  • automatic Mesh Bed Leveling,
  • filament sensor,
  • power loss recovery (power panic)
  • SuperPINDA probe for improved first layer calibration
  • high-quality bearings to make the printer easier to assemble and maintain. T


FAST FACTS:

  • Build volume: 250mm x 210mm x 210mm (9.84in X 8.27in X 8.27in)
  • Current Print Bed = Satin Finish
  • Supported Materials: | Prusa Material Table

PLEASE NOTE the cleaning and adhesion methods on the "printable on satin sheet" column in the Prusa Material Table

DO NOT CLEAN WITH ACETONE!!!!


TROUBLESHOOTING

It's important to have all mechanical parts of the printer perfectly assembled and keep pulley drive clean.

Use following links covering most common problems :

For more detailed troubleshooting and repair, please consult the Prusa 3d manual at the link below.

VENDOR RESOURCES: