Longer Nano: Difference between revisions

Revision as of 00:12, 29 September 2024

Laser Type: 450nm blue light diode laser
Power: 6W
Aiming mechanism: "a glass" bends the laser night according to Kickstarter, generally described as a galvo versus traditional X/Y carriage
"0.05 x 0.05mm Precision" (product landing page) (does this mean 1270 dpi?.. 25.4 mm per inch / 0.05)
Max Speed: 600mm/s
Working Area: 100mm x 100mm extendable to 100mm x 300mm with extension
Preview speed: 17000mm/s
Thickest cut: 4mm
Gold/Silver can ben engraved by first applying paint and an oxidizing layer (according to Kickstarter)
Transparent acrylic: Engraving not recommended but can paint it black first with a pen (according to Kickstarter). 450nm diode lasers apparently have issues with transparent materials without coating

Laser Type: 450nm blue light diode laser
Power: 12W
Aiming mechanism: "a special lens" bends the light according to Kickstarter, generally described as a galvo versus traditional X/Y carriage
"0.02 x 0.02mm Precision with field lens" (product landing page) (does this mean 1270 dpi?.. 25.4 mm per inch / 0.02)
Max Speed: 2200mm/s
Working Area: 100mm x 100mm extendable to 100mm x 300mm with extension
Preview speed: 17000mm/s
Thickest cut: 8.5mm
Gold/Silver can ben engraved by first applying paint and an oxidizing layer (according to Kickstarter)
Transparent acrylic: Engraving not recommended but can paint it black first with a pen (according to Kickstarter). 450nm diode lasers apparently have issues with transparent materials without coating

Before Oct 1, 2024, you would buy the GCODE/GRBL version, after Oct 1, 2024, you want the LightBurn Core product

Automatic Configuration: Load the proper LightBurn lbdev configuration file for your device
- Longer Nano 6W Lightburn Device Config File, updated September 28, 2024 - Lightburn Library with Boss Recommended Settings and more NOTE: If the downloaded file is a .xml, rename it to be .lbdev extension
Manual Configuration:
- Laser or Controller: GRBL
- Connect via Serial/USB
- Give it a name and X Axis = 100mm, Y Axis = 100mm
- Origin: Front Left, Auto "home" on startup disabled
- You may need to select the correct COM port

@@ Line 29: / Line 29: @@
 ==== Initial Setup ====
 * Automatic Configuration: Load the proper LightBurn lbdev configuration file for your device
-** * [[Media:LaserNano6W-LightBurnDeviceConfig.lbdev|Longer Nano 6W Lightburn Device Config File, updated September 28, 2024]] - Lightburn Library with Boss Recommended Settings and more NOTE: If the downloaded file is a .xml, rename it to be .lbdev extension
+** [[Media:LaserNano6W-LightBurnDeviceConfig.lbdev|Longer Nano 6W Lightburn Device Config File, updated September 28, 2024]] - Lightburn Library with Boss Recommended Settings and more NOTE: If the downloaded file is a .xml, rename it to be .lbdev extension
 * Manual Configuration:
 ** Laser or Controller: GRBL