Actions

Boss LS-3655: Difference between revisions

From Annapolis Makerspace Wiki

← Older edit
 
(26 intermediate revisions by 3 users not shown)
Line 3: Line 3:
* [https://lightburnsoftware.com/pages/lightburn-documentation LightBurn Software Manual] - Documentation for the LightBurn software
* [https://lightburnsoftware.com/pages/lightburn-documentation LightBurn Software Manual] - Documentation for the LightBurn software
* [https://lightburnsoftware.com/pages/tutorials LightBurn Tutorials]
* [https://lightburnsoftware.com/pages/tutorials LightBurn Tutorials]
* [https://forum.lightburnsoftware.com/t/rotary-issue-y-axis/1827 Preventing Homing on Laser] - Press ESC to cancel the homing sequence
* [https://forum.lightburnsoftware.com/t/rotary-issue-y-axis/1827 Preventing Homing on Laser] - Press ESC to cancel the homing sequence, after the controller beeps (carriage may start moving a split second before that)


== Recommended Settings ==
== Recommended Settings ==
* [[Media:Boss_LS-3655_100W_Lightburn_Cut_Library.clb|Boss LS-3655 100W Lightburn Cut Library, updated 11/15/2019]] - Lightburn Library with Boss Recommended Settings and more
* [[Media:Boss_LS-3655_100W_Lightburn_Cut_Library.clb|Boss LS-3655 100W Lightburn Cut Library, updated 11/15/2019]] - Lightburn Library with Boss Recommended Settings and more NOTE: If the downloaded file is a .xml, rename it to be .clb extension
* [https://www.bosslaser.com/laser-settings/ Boss Laser Materials Recommended Settings] - Use settings for 100W
* [https://www.bosslaser.com/laser-settings/ Boss Laser Materials Recommended Settings] - Use settings for 100W
* [https://nova-labs.org/wiki/_media/equipment/hurricane-charley-material-settings.pdf NoVA Labs Recommended Settings For Their 100W Laser]
* [https://nova-labs.org/wiki/_media/equipment/hurricane-charley-material-settings.pdf NoVA Labs Recommended Settings For Their 100W Laser]
Line 25: Line 25:
If you want to set up the Boss LS-3655 in LightBurn or another program, here are the settings you need:
If you want to set up the Boss LS-3655 in LightBurn or another program, here are the settings you need:
* Type: Ruida
* Type: Ruida
* Connection: USB or ethernet, depending on if you're connected directly via USB (the shop laptop) or ethernet (your laptop or another computer on the shop LAN)
* Connection: USB (Best to use this setting but transfer the file to computer already connect to Boss, rather than moving USB)
* 1400mm x 900mm
* 1400mm x 900mm
* Home is rear-right position
* Home is rear-right position
Line 31: Line 31:


== Software ==
== Software ==
 
* [https://lightburnsoftware.com Lightburn] - Makerspace members receive a significant discount on a license for their own computer, where they can prepare Lightburn files at their convenience.  These files can later be uploaded to the laser's computer at the makerspace. Inquire on our Slack channel for more details.
=== Lightburn ===
  If you want to run Lightburn on your own computer, to work on stuff before coming into the shop to run a job, contact Subrata to get the discount code which lets you buy a copy for $20
  There is a free trial, though, so you can run it for a while before you buy it.
 
* [[Media:Boss_LS-3655_100W_Lightburn_Cut_Library.clb|Boss LS-3655 100W Lightburn Cut Library, updated 11/15/2019]] - Lightburn Library with Boss Recommended Settings and more
 
=== LaserWorks ===
    We don't currently use LaserWorks


== Example Projects ==
== Example Projects ==
Line 51: Line 43:


== Design Sites ==
== Design Sites ==
=== Pay Sites ===
* [https://laser-templates.com Laser Templates] - Inexpensive designs fully usable for both personal and commercial products
* [https://laser-templates.com Laser Templates] - Inexpensive designs fully usable for both personal and commercial products
* [https://www.etsy.com/shop/Vasily39 Laser Cutting Templates by Vasily39 on Etsy]
=== Free Sites ===
* [https://www.dxfforcnc.com/collections/free-dxf-files DXFforCNC]
* [https://www.dxfforcnc.com/collections/free-dxf-files DXFforCNC]
* [http://www.readytocut.com/community/forums/cnc-art-file-sharing.136/ Ready To Cut] - CNC Art Files For Sharing
* [http://www.readytocut.com/community/forums/cnc-art-file-sharing.136/ Ready To Cut] - CNC Art Files For Sharing
Line 61: Line 56:
* [https://www.designshop.com/search/free-cnc-project-files.html DesignShop Free CNC Project Files]
* [https://www.designshop.com/search/free-cnc-project-files.html DesignShop Free CNC Project Files]
* [http://wood-toolbox.com/ Wood Toolbox] - Templates for lasers and CNCs
* [http://wood-toolbox.com/ Wood Toolbox] - Templates for lasers and CNCs
* [https://www.makecnc.com/welcome.php MakeCNC]
== Design Tools ==
* [https://suncatcherstudio.com/ Stencil Generator from Suncatcher Studio]
* [http://flatfab.com/ FlatFab]
* [https://www.luban3d.com/ LubAn 3D] - Tons of different tools for creating or processing 3D models for 3D printing, CNC and laser cutting
* [https://polygonia.design/ Polygonia Design Suite] - Rapidly Create Symmetrical Designs for Manufacturing
* [https://polygonia.design/ Polygonia Design Suite] - Rapidly Create Symmetrical Designs for Manufacturing
* [https://www.makecnc.com/welcome.php MakeCNC]
* [http://www.photo2stencil.com/ Photo 2 Stencil]
* [http://www.photo2stencil.com/ Photo 2 Stencil]
* [http://stencilfy.herokuapp.com/ Stencilfy] - Turn text into stencils
* [[Boss LS-3655#Box_Generators|Box Generators]]


== Useful Tools ==
== Useful Tools ==
* [https://www.ponoko.com/blog/digital-manufacturing/definitive-guide-nesting-software-laser-cut-designs/ Definitive Guide to Nesting Software for Laser Cut Designs]
* [https://www.ponoko.com/blog/digital-manufacturing/definitive-guide-nesting-software-laser-cut-designs/ Definitive Guide to Nesting Software for Laser Cut Designs]
* [https://kpc29laser.fr/MGL/MGL.html Multi Generator 2.2.2 Online] - Generates test files for power, acceleration, DPI, cut, kerf, depth, grid placement


== Materials Links ==
== Materials Links ==
* [https://www.engraversjournal.com/article.php/3179/index.html The Scoop On Plastic Substrates]
=== Wood ===
* [https://ocoochhardwoods.com Ocooch Hardwoods] - Suppliers of thin wood and plywood for scroll sawing, carving, intarsia, wood turning, laser cutting and engraving, thick veneers and much more.
* [https://www.woodcraft.com/ WoodCraft]
 
=== Acrylic ===
* [https://www.usplastic.com/catalog/default.aspx?catid=442&parentcatid=443 USPlastics Acrylic]
* [https://www.usplastic.com/catalog/default.aspx?catid=442&parentcatid=443 USPlastics Acrylic]
* [https://www.engraving-supplies.com/ TroTec Engraving Supplies] - Including two-color acrylics like Rowmark
* [https://www.engraving-supplies.com/ TroTec Engraving Supplies] - Including two-color acrylics like Rowmark
* [https://ocoochhardwoods.com Ocooch Hardwoods] - Suppliers of thin wood and plywood for scroll sawing, carving, intarsia, wood turning, laser cutting and engraving, thick veneers and much more.
* [https://www.ebay.com/str/plasticsacrylic plasticsacrylic on eBay] - (NOTE: Sometimes hefty shipping fees but can combine orders) Has some thinner (1/16") acrylic not found in other sources, also has a wide selection of other interesting acrylics including various colors of mirrored
* [https://www.engraversjournal.com/article.php/3179/index.html The Scoop On Plastic Substrates]
* [https://www.cohnacrylics.com/ COHn Acrylics]
 
=== Various ===
* [https://www.xtool.com/pages/xtool-selected-materials XTool] - Acrylic, fancy plywood
* [https://www.inventables.com/categories/materials Inventables] - Acrylic, circuit board blanks, corian, machinable wax and foam, metal, plastic, stamping, wood & mdf
* [https://www.inventables.com/categories/materials Inventables] - Acrylic, circuit board blanks, corian, machinable wax and foam, metal, plastic, stamping, wood & mdf
* [https://smokeyhilldesigns.com/ Smoke Hill Designs] - Wood for lasers
* [https://www.woodcraft.com/ WoodCraft]
* [https://www.rowmark.com/products RowMark] - Lots of different specialty materials including wood and acrylic for lasers
* [https://www.rowmark.com/products RowMark] - Lots of different specialty materials including wood and acrylic for lasers
* [https://smokeyhilldesigns.com/ Smoke Hill Designs] - Wood and acrylic for lasers
* [https://modfy.build/ Modfy] - Wood and acrylic for lasers, lots of different patterns and colors
=== Other ===
* [https://browse.jdsindustries.com/main.php?r=frontEnd&view=front&jds-category1=16&jds-category1-desc=Laserable+Leatherette JDS Industries] - Laserable Leatherette
=== Engraving/Finishing ===
* [https://www.jpplus.com/stone-color-fill-kit-5-colors Stone Color Fill] - Soaks into pores of stone that's been laser engraved
* [https://www.jpplus.com/stone-color-fill-kit-5-colors Stone Color Fill] - Soaks into pores of stone that's been laser engraved
* [https://www.jpplus.com/6-x-25-engravable-laser-foil Laser Foil]
* [https://www.jpplus.com/6-x-25-engravable-laser-foil Laser Foil]
* [https://www.jpplus.com/engraving/fabrication/marking/laserflex-heat-transfer-sample-kit Laser heat transfer foil sheet]
* [https://www.jpplus.com/engraving/fabrication/marking/laserflex-heat-transfer-sample-kit Laser heat transfer foil sheet]
* [https://www.ebay.com/str/plasticsacrylic plasticsacrylic on eBay] - (NOTE: Sometimes hefty shipping fees but can combine orders) Has some thinner (1/16") acrylic not found in other sources, also has a wide selection of other interesting acrylics including various colors of mirrored
* [https://www.cermark.com/ CerMark Spray] - For marking typically un-markable metal with the laser. Binds the spray material to the metal
* [https://www.cermark.com/ CerMark Spray] - For marking typically un-markable metal with the laser. Binds the spray material to the metal
* [https://smile.amazon.com/CRC-03084-Lubricant-Aerosol-Spray/dp/B0013J62P4 CRC Dry Moly Lube] - Cheap alternative to CerMark Spray
* [https://smile.amazon.com/CRC-03084-Lubricant-Aerosol-Spray/dp/B0013J62P4 CRC Dry Moly Lube] - Cheap alternative to CerMark Spray
Line 89: Line 103:
* [https://brilliancelaserinks.com/ Brilliance Laser Inks] - Alternative to CerMark Spray but also has a powder option
* [https://brilliancelaserinks.com/ Brilliance Laser Inks] - Alternative to CerMark Spray but also has a powder option


== Box Generators ==
== Box Generators (updated 9/7/2024) ==
https://makerdesignlab.com/tutorials-tips/online-file-generators-for-laser-cutting/
[https://makerdesignlab.com/tutorials-tips/online-file-generators-for-laser-cutting/ MakerDesignLab Tools List] - Great list of online tools for creating boxes, gears, labyrinths, jigsaw puzzles, etc


https://boxmaker.connectionlab.org/
[https://www.festi.info/boxes.py/ Boxes.py] redirects to [https://boxes.hackerspace-bamberg.de/ boxes.hackerspace-bamberg.de] - TONS of boxes/etc. A+++


https://boxdesigner.connectionlab.org
[https://www.makercase.com MakerCase] - Simple Boxes, Polygon Boxes with 3 or more sides, Boxes with round corners, Boxes with dividers. Very good but simple online box generator


http://boxdesigner.frag-den-spatz.de/
[https://www.templatemaker.nl/en/ TemplateMaker] - Design tool to make templates for tons of paper boxes and such


https://community.glowforge.com/t/tab-box-generator/7222
[https://boxdesigner.connectionlab.org Box Designer at ConnecitonLab]


https://www.festi.info/boxes.py/
[http://boxdesigner.frag-den-spatz.de/ boxdesigner at frag-de-spatz.de]


https://github.com/Neon22/inkscape-LasercutBox
[https://community.glowforge.com/t/tab-box-generator/7222 Tab-Box Generator on GlowForge community]


https://github.com/BvdP/elliptical-box-maker/
[https://github.com/Neon22/inkscape-LasercutBox Inkscape-LasercutBox by Neon22]


https://github.com/paulh-rnd/TabbedBoxMaker
[https://github.com/BvdP/elliptical-box-maker/ elliptical-box-maker by BvdP]


https://imagio.dk/boxmaker/
[https://github.com/paulh-rnd/TabbedBoxMaker TabbedBoxMaker by paulh-md]


https://www.instructables.com/id/Generating-elliptical-boxes-using-a-laser-cutter-a/
[https://imagio.dk/boxmaker/ BoxMaker at Imagio.dk]


https://www.instructables.com/id/Joinery-Joints-for-Laser-Cut-Assemblies/
[https://www.instructables.com/id/Generating-elliptical-boxes-using-a-laser-cutter-a/ Generating Elliptical Boxes Using a Laser Cutter and Inkscape]


http://joostn.github.io/OpenJsCad/ - Gear generator
[https://www.instructables.com/id/Joinery-Joints-for-Laser-Cut-Assemblies/ Joinery: Joints for Laser Cut Assemblies]


http://jeromeleary.com/laser/
[http://joostn.github.io/OpenJsCad/ OpenJsCad Gear generator]


https://www.makercase.com
[http://jeromeleary.com/laser/ Laser Cut Box Generator at Jeromeleary.com]


http://www.reidb.net/LaserLivingHinges.html
[http://www.reidb.net/LaserLivingHinges.html Tabbed Boxes with Living Hinges]


https://www.thingiverse.com/thing:255013
[https://www.thingiverse.com/thing:255013 Parametric box maker for lasercut on Thingiverse]


https://www.thingiverse.com/thing:404
[https://www.thingiverse.com/thing:404 Box-o-Tron 1.0 on Thingiverse]

Latest revision as of 17:25, 7 September 2024

Useful Links

Recommended Settings

Material Guides

Safety

Laser Parameters

If you want to set up the Boss LS-3655 in LightBurn or another program, here are the settings you need:

  • Type: Ruida
  • Connection: USB (Best to use this setting but transfer the file to computer already connect to Boss, rather than moving USB)
  • 1400mm x 900mm
  • Home is rear-right position
  • 100W (don't think this is a configuration option, just good to know for selecting power settings per Recommended Settings)

Software

  • Lightburn - Makerspace members receive a significant discount on a license for their own computer, where they can prepare Lightburn files at their convenience. These files can later be uploaded to the laser's computer at the makerspace. Inquire on our Slack channel for more details.

Example Projects

Design Sites

Pay Sites

Free Sites

Design Tools

Useful Tools

Materials Links

Wood

  • Ocooch Hardwoods - Suppliers of thin wood and plywood for scroll sawing, carving, intarsia, wood turning, laser cutting and engraving, thick veneers and much more.
  • WoodCraft

Acrylic

Various

  • XTool - Acrylic, fancy plywood
  • Inventables - Acrylic, circuit board blanks, corian, machinable wax and foam, metal, plastic, stamping, wood & mdf
  • RowMark - Lots of different specialty materials including wood and acrylic for lasers
  • Smoke Hill Designs - Wood and acrylic for lasers
  • Modfy - Wood and acrylic for lasers, lots of different patterns and colors

Other

Engraving/Finishing

Box Generators (updated 9/7/2024)

MakerDesignLab Tools List - Great list of online tools for creating boxes, gears, labyrinths, jigsaw puzzles, etc

Boxes.py redirects to boxes.hackerspace-bamberg.de - TONS of boxes/etc. A+++

MakerCase - Simple Boxes, Polygon Boxes with 3 or more sides, Boxes with round corners, Boxes with dividers. Very good but simple online box generator

TemplateMaker - Design tool to make templates for tons of paper boxes and such

Box Designer at ConnecitonLab

boxdesigner at frag-de-spatz.de

Tab-Box Generator on GlowForge community

Inkscape-LasercutBox by Neon22

elliptical-box-maker by BvdP

TabbedBoxMaker by paulh-md

BoxMaker at Imagio.dk

Generating Elliptical Boxes Using a Laser Cutter and Inkscape

Joinery: Joints for Laser Cut Assemblies

OpenJsCad Gear generator

Laser Cut Box Generator at Jeromeleary.com

Tabbed Boxes with Living Hinges

Parametric box maker for lasercut on Thingiverse

Box-o-Tron 1.0 on Thingiverse

Retrieved from "http://wiki.makeannapolis.org/index.php?title=Boss_LS-3655&oldid=1804"